Flatop Series

Powered Belt Curves Arcs 15º to 180º Ordering Code Example LOAD/SPEED SPECIFICATIONS: 90ºTURNS   36" Series 48" Series 60" Series 84" Series MAX LOAD (1) 125 Lbs 175 Lbs 225 Lbs 250 Lbs MAX SPEED (2) 200 FPM 300 FPM 400 FPM 400 FPM (1) based on 60 fpm speed (2) based on 10 lbs. total load STANDARD UNIT SPECIFICATIONS  Arcs:  15º to 180º  Loads:  To 40 lbs/ft.  Speed:  To 400 fpm  Belt Widths:  To 48"  Frame:  12 gauge formed channel  Belt:  120 lb. PVC, smooth top, Clipper type lacing  Supports:  12 gauge formed channel  Drive: Shaft mounted gear reducer, TEFC motor  Paint:  PSC green, blue, beige, white Options Stainless steel construction Bed relief rolls for higher load capacity Side guards - 14 gauge steel, no sharp edges Belts - white nitrile (FDA approved), ruftop, others on request Drive - variable speed; AC, DC or mechanical Transfer roll/dead plates for small product transfer For high speed, extra heavy load requirements or special radii, PSC manufactures a broad line of chain driven power belt curves.and SPIRALS. Please see our general product brochure for over 100 standard models available in 15º through 360º arcs. Custom requirements quoted promptly.	"36" Series - 36" Outside Radius
	MODEL No.	Constant Dimension	A	B	E	F
	FTT 29 6	C=35.5	29	6	32.5	4.30
	27 8	D=36	27	8	31.5	4.18
	25 10	X=1	25	10	30.5	4.06
	23 12	"	23	12	29.5	3.93
	*21 14	"	21	14	28.5	3.81**
	19 16	"	19	16	27.5	3.68**
	17 18	"	17	18	26.5	3.56**
	"48" SERIES-48" OUTSIDE RADIUS
	FTT 41 6	C=47.5	41	6	44.5	4.12
	39 8	D=48	39	8	43.5	4.03
	37 10	X=1	37	10	42.5	3.95
	*35 12		35	12	41.5	3.86
	33 14		33	14	40.5	3.77
	31 16		31	16	39.5	3.68
	*29 18		29	18	38.5	3.60
	27.20		27	20	37.5	3.51**
	25.22		25	22	36.5	3.42**
	*23 24		23	24	35.5	3.34**
	"60" SERIES- 60" OUTSIDE RADIUS
	FTT 47 12	C=59.5	47	12	53.5	4.90
	45 14	D=60	45	14	52.5	4.82
	43 16	X=1	43	16	51.5	4.73
	*41 18	"	41	18	50.5	4.64
	39 20	"	39	20	49.5	4.55
	*37 22	"	37	22	48.5	4.47
	*35 24	"	35	24	47.5	4.38
	33 26	"	33	26	46.5	4.29
	31 28	"	31	28	45.5	4.21
	*29 30	X=1-3/16	29	30	44.5	4.12**
	27 32	"	27	32	43.5	4.03**
	25 34	"	25	34	42.5	3.95**
	*23 36	"	23	36	41.5	3.86**
	"84" SERIES- 84" OUTSIDE RADIUS
	FTT 65 18	C=83.5	65	18	74.5	4.70
	63 20	D=84	63	20	73.5	4.64
	61 22	X=1	61	22	72.5	4.58
	59 24	"	59	24	71.5	4.52
	57 26	"	57	26	70.5	4.46
	55 28	"	55	28	69.5	4.40
	*53 30	X=1 3/16	53	30	68.5	4.34**
	51 32	"	51	32	67.5	4.28**
	49 34	"	49	34	66.5	4.22**
	*47 36	X=1 7/16	47	36	65.5	4.16**
	45 38	"	45	38	64.5	4.10**
	43 40	"	43	40	63.5	4.04**
	41 42	"	41	42	62.5	3.98**
	39 44	"	39	44	61.5	3.92**
	37 46	"	37	46	60.5	3.86**
	*35 48	"	35	48	59.5	3.80**
	* ** Components normally in stock. Slight bearing protrusion at inside radius. Please consult factory for use with oversized product applications.